AST AST090 30060 plain bearings
| Brand Name: |
AST |
| Model Number: |
AST090 30060 |
| cad.nachiamerica.com: |
Air Applied |
| en-mx.misumi-ec.com: |
4.38 in; 111.3 mm |
| cad.timken.com: |
1.38 in; 35.1 mm |
| bearingsize.info: |
17.50 in; 444.5 mm |
| Dimension F: |
3.25 in; 82.6 mm |
| Dimension G: |
1.06 in; 26.9 mm |
| Dimension H: |
7.00 in; 177.8 mm |
| Dimension J: |
0.25 in; 6.4 mm |
| PDF |
AST090 30060 |
Product Details
| cad.nachiamerica.com |
Air Applied |
| en-mx.misumi-ec.com |
4.38 in; 111.3 mm |
| cad.timken.com |
1.38 in; 35.1 mm |
| bearingsize.info |
17.50 in; 444.5 mm |
| Dimension F |
3.25 in; 82.6 mm |
| Dimension G |
1.06 in; 26.9 mm |
| Dimension H |
7.00 in; 177.8 mm |
| Dimension J |
0.25 in; 6.4 mm |
| Dimension M |
7.38 in; 187.5 mm |
| Dimension N |
6.50 in; 165.1 mm |
| Dimension Q |
1.50 in; 38.1 mm |
| Dimension T |
7.00 in; 177.8 mm |
| Manufacturer |
Wichita Clutch |
| Water Volume |
20 in³; 0.33 dm³ |
| Assembly Number |
7-314-110-115-0 |
| Bolt Hole Size L |
21/32 in; 16.7 mm |
| Pilot Diameter A |
18.747/18.750 in; 476.17/476.25 mm |
| Pilot Diameter C |
14.375/14.378 in; 365.13/365.20 mm |
| Maximum Bore Size |
4.38 in; 111 mm |
| Maximum Lining Wear |
0.5 in; 1.3 cm; 60 in³; 1.0 dm³ |
| Disc & Gear (Weight) |
40 lb; 18 kg |
| Number of Bolt Holes |
6 |
| Total Brake (Weight) |
221 lb; 100.2 kg |
| Disc & Gear (Inertia) |
5 lb·ft²; 0.21 kg·m² |
| Bolt Hole Circle Diameter B |
17.500 in; 444.50 mm |
| Number of Inlet Ports - Thread Size |
2- 1/2 NPT |
| Heat Capacity for Series Water Hosing |
50 hp; 37 kW |
| Dynamic Torque Rating (100 psi/7 bar)2 |
21000 lb.in; 2373 Nm |
| Dynamic Torque Rating (80 psi/5.5 bar)1 |
16800 lb.in; 1864 Nm |
| Heat Capacity for Parallel Water Hosing |
75 hp; 56 kW |
| Number of Coolant Inlets - Thread Size3 |
2 - 1/2 NPT |
| Parallel Water Flow 0 % Ethylene Glycol |
7.5 gpm; 28 lpm |
| Parallel Water Flow 30 % Ethylene Glycol |
9.8 gpm; 37 lpm |
| Parallel Water Flow 50 % Ethylene Glycol |
12 gpm; 45 lpm |
| Pressure Drop Series Flow with 0 % Ethylene Glycol |
4 psi; 0.14 bar |
| Pressure Drop Series Flow with 30 % Ethylene Glycol |
8 psi; 0.55 bar |
| Pressure Drop Series Flow with 50 % Ethylene Glycol |
12 psi; 0.83 bar |