AST AST090 30060 plain bearings
| Brand Name: | AST |
| Model Number: | AST090 30060 |
| cad.nachiamerica.com: | Air Applied |
| en-mx.misumi-ec.com: | 4.38 in; 111.3 mm |
| cad.timken.com: | 1.38 in; 35.1 mm |
| bearingsize.info: | 17.50 in; 444.5 mm |
| Dimension F: | 3.25 in; 82.6 mm |
| Dimension G: | 1.06 in; 26.9 mm |
| Dimension H: | 7.00 in; 177.8 mm |
| Dimension J: | 0.25 in; 6.4 mm |
| PDF |
AST090 30060 |
Product Details
| cad.nachiamerica.com | Air Applied |
| en-mx.misumi-ec.com | 4.38 in; 111.3 mm |
| cad.timken.com | 1.38 in; 35.1 mm |
| bearingsize.info | 17.50 in; 444.5 mm |
| Dimension F | 3.25 in; 82.6 mm |
| Dimension G | 1.06 in; 26.9 mm |
| Dimension H | 7.00 in; 177.8 mm |
| Dimension J | 0.25 in; 6.4 mm |
| Dimension M | 7.38 in; 187.5 mm |
| Dimension N | 6.50 in; 165.1 mm |
| Dimension Q | 1.50 in; 38.1 mm |
| Dimension T | 7.00 in; 177.8 mm |
| Manufacturer | Wichita Clutch |
| Water Volume | 20 in³; 0.33 dm³ |
| Assembly Number | 7-314-110-115-0 |
| Bolt Hole Size L | 21/32 in; 16.7 mm |
| Pilot Diameter A | 18.747/18.750 in; 476.17/476.25 mm |
| Pilot Diameter C | 14.375/14.378 in; 365.13/365.20 mm |
| Maximum Bore Size | 4.38 in; 111 mm |
| Maximum Lining Wear | 0.5 in; 1.3 cm; 60 in³; 1.0 dm³ |
| Disc & Gear (Weight) | 40 lb; 18 kg |
| Number of Bolt Holes | 6 |
| Total Brake (Weight) | 221 lb; 100.2 kg |
| Disc & Gear (Inertia) | 5 lb·ft²; 0.21 kg·m² |
| Bolt Hole Circle Diameter B | 17.500 in; 444.50 mm |
| Number of Inlet Ports - Thread Size | 2- 1/2 NPT |
| Heat Capacity for Series Water Hosing | 50 hp; 37 kW |
| Dynamic Torque Rating (100 psi/7 bar)2 | 21000 lb.in; 2373 Nm |
| Dynamic Torque Rating (80 psi/5.5 bar)1 | 16800 lb.in; 1864 Nm |
| Heat Capacity for Parallel Water Hosing | 75 hp; 56 kW |
| Number of Coolant Inlets - Thread Size3 | 2 - 1/2 NPT |
| Parallel Water Flow 0 % Ethylene Glycol | 7.5 gpm; 28 lpm |
| Parallel Water Flow 30 % Ethylene Glycol | 9.8 gpm; 37 lpm |
| Parallel Water Flow 50 % Ethylene Glycol | 12 gpm; 45 lpm |
| Pressure Drop Series Flow with 0 % Ethylene Glycol | 4 psi; 0.14 bar |
| Pressure Drop Series Flow with 30 % Ethylene Glycol | 8 psi; 0.55 bar |
| Pressure Drop Series Flow with 50 % Ethylene Glycol | 12 psi; 0.83 bar |
