| e - ISO Factor8 | 0.4 |
| Y1 - ISO Factor9 | 1.68 |
| T - Bearing Width across Cones | 1.8126 in |
| Y2 - ISO Factor10 | 2.5 |
| Aa - Cage-Cone Backface Clearance | 0.06 in |
| C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3 | 4390 lbf |
| Design Units | Imperial |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 3020 lbf |
| Cage Type | Stamped Steel |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4 | 29500 lbf |
| C - Double Cup Width | 1.3750 in |
| d | 1.5 in |
| Cone Part Number | 28150 |
| Bearing Weight | 2.12 lb |
| Ab - Cage-Cone Frontface Clearance | 0.07 in |
| db - Cone Backface Backing Diameter | 1.79 in |
| B - Cone Width | 0.8244 in |
| D | 3.1510 in |
| Series | 28000 |
| R - Cone Backface To Clear Radius1 | 0.06 in |
Sponsored products related to BH6907E NOK MECHANICAL SEAL | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | m | C | k | d | D | Lw | Cr | C0 |
| 6907 | Ruville | - | - | - | - | - | - | - | - |
| 713690700 | FAG | - | - | - | - | - | - | - | - |
| 713690710 | FAG | - | - | - | - | - | - | - | - |
| 713690720/713690730 | FAG | - | - | - | - | - | - | - | - |
| 713690730 | FAG | - | - | - | - | - | - | - | - |
| 713690750 | FAG | - | - | - | - | - | - | - | - |
| 713690780 | FAG | - | - | - | - | - | - | - | - |
| RNA6907 | SKF | - | 48,4 kN | - | 42 | 55 mm | - | - | 93 kN |
| RNA6907-ZW | INA | 193 g / Weight | 36 mm | - | 42 | 55 mm | - | - | - |
| RNA6907-ZW-XL | INA | - | 54 kN | - | 42 | 55 mm | - | - | 86 kN |
| RNA6907R | NTN | - | 49 kN | 3 mm | 42 | 55 mm | 13.8 mm | 49 kN | 86,5 kN |
| BG3988E NOK MECHANICAL SEAL | Banded:No; C0a:51000 lbf / Static l; Outside Diameter:4.882 Inch | 124 Mil; Component Description:Aligning Washer Only; Optional Components:Order 4116 Bearing a; Bore 1:3.504 Inch | 89 Mill; Category:Thrust Ball Bearing; Weight / LBS:0.66; D2:3,504 inch; T1:37 mm; D2:89 mm; Manufacturer Name:SCHAEFF |
| AP7744F NOK SEAL | Threads B:M115x2; Piston Area:5900 mm²; C:185.0 mm; Piston Length of Travel:5 mm; D:38.00 mm; A:6 mm; E:154 mm; Assembly Weight:5.100 Kg; E1:116 mm; |
| BE1059E NOK SEAL | D:320 mm; Bearing number:NP849042/NP403673; d:240 mm; Outer Diameter (mm):320; B:39 mm; Width (mm):42; T:42 mm; Bore Diameter (mm):240; Size (mm):240x320x42; |
| AP2085A NOK OIL SEAL | B:25 mm; D:130 mm; d:75 mm; Outer Diameter (mm):130; Bearing number:NP215; Width (mm):25; C:25 mm; Bore Diameter (mm):75; Size (mm):75x130x25; |
| AE1377F NOK MECHANICAL SEAL | Bearing number:CX329; Designation SNR:R150.15; Designation SKF:VKBA 890; |
| AP1260G NOK SEAL | d:6 mm; Weight:0,0007 Kg; C:3 mm; Basic dynamic load rating (C):0,5 kN; Bore Diameter (mm):6; D:10 mm; Width (mm):3; B:3 mm; Outer Diameter (mm):10; Basic static load rating (C0):0,216 kN; Size (mm):6x10x3; (Grease) Lubrication Speed:45000 r/min; Bearing number:MR106ZZ; |
| AE3744A NOK SEAL | Bore Diameter (mm):50; a:16,7 mm; r1 min.:0,6 mm; Bearing number:7010 C; (Oil) Lubrication Speed:17 000 r/min; (Grease) Lubrication Speed:12 000 r/min; C:16 mm; Da max.:74 mm; Basic dynamic load rating (C):26 kN; d:50 mm; da min.:56 mm; Size (mm):50x80x16; Basic static load rating (C0):21,9 kN; r mi |
| BH2051E NOK MECHANICAL SEAL | r - Cup Backface To Clear Radius2:1.27 mm; Cage Type:Stamped Steel; da - Cone Frontface Backing Diameter:41.91 mm; Cg - Geometry Factor:0.0707; d:36.513 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2270 lbf; Bearing Weight:0.4 Kg; C1 - Dynamic Radial Rating (1 million revolutions)5:127 |
BH6907E NOK MECHANICAL SEAL Video
Oil seals |Seal products - NOK CORPORATION
This page contains information on NOK Corporation's products (oil seals).NOK is Japan's first oil seal manufacturer.Our functional parts created through our ...
(Page5)Part Number | Standard Oil Seal - TC Series (NOK)
Standard Oil Seal - TC Series (NOK) (Part Numbers) ... Rubber rotation seal. Enclosed inner side, open outer side with dust lip.
AE1557-E1 NOK - Metric Seals
Radial shaft seal with rubber covered O.D. And spring loaded sealing lip, and additional dist lip. Sealing lip trimmed on the front face. Material: NBR (Natural ...
NOK - Oil Seals
The seal lip has the cross-sectional profile of a wedge, and it presses down onto the shaft surface to seal in fluid. Lip Area Seal Lip.222 pagesMissing: BH6907E | Must include: BH6907E
Oil Seals | The Timken Company
Oil seals are used wherever shafts rotate and bearings require lubrication. Available in inch and metric sizes, the Timken line of O-Ring Seal Kits have the ...
Manufacturer Japan NOK TC TB Type Oil Seal Cross Reference
Manufacturer of Japan NOK TB Type Large Diameter Oil Seal Size List. click & send an product inquiry to IKSONIC team. Email: [email protected]