| Bearing Outside Diameter, Nominal(Do) | 285.000 |
| Material | Wrapped bronze with |
| Bearing Length, Nominal (B) | 80.000 |
| Outer Diameter (mm) | 285 |
| ID Chamfer Length (Ci) | 0.600 |
| Bearing Bore after Mounting (di) - 285 +0.130 / -0 | 285 +0.130 / 0 |
| Bearing Type | straight |
| Shaft Size (ds) - 280 -0.190 / -0.242 | 280 0.190 / 0.242 |
| OD Chamfer Length (Co) | 1.800 |
| Housing Bore Dia. (Dh) - 285 +0.052 / -0 | 285 +0.052 / 0 |
| Bearing number | AST090 28080 |
| Shaft Dia., Nominal (d) | 280.0000 |
| Wall Thickness (S3) | 2.500 |
| ID Chamfer Angle (B deg.) | 45 |
| Bore Diameter (mm) | 280 |
| Bearing Length Tolerance (B tol.) - +0 / -0.40 | +0 / 0.40 |
Cross reference SR55-1140L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type LM Guide (SR),Radial Rail (SR) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | m | A | Z | D | H | d | B | |
| ZR1.30.1140.400-1SPPN | ISB | - | 10 mm | - | 99 mm | 1251 mm | 91 mm | 979 mm | - |
| XGB41140.P | SNR | - | - | - | - | 72,04 mm | - | 37 mm | 37 mm |
| XGB41140R00 | SNR | - | - | - | - | 72,04 mm | - | 37 mm | 37 mm |
| K81140-M | INA | GS81140 / Allocated housing locating washer | 1,93 kg / Weight | - | - | 250 | - | 200 | - |
| K81140M | SKF | - | - | - | - | 250 mm | - | 200 mm | - |
| K 81140-MB | NKE | - | - | - | - | 250 mm | - | 200 mm | - |
| GS 81140 | SKF | - | - | - | - | 250 mm | - | 11 | 11 mm |
| 51140 | Loyal | - | - | - | - | 247 mm | - | 200 mm | - |
| 51140 M | ISB | - | - | - | - | 250 mm | 37 mm | 200 mm | - |
| 51140-MP | FAG | - | 4,12 kg / Weight | 2,4 / Factor min. load | - | 250 mm | - | 200 mm | - |
| 51140M | Loyal | - | - | - | - | 250 mm | 37 mm | 200 mm | - |
| SHS55-2940L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard Caged Ball LM Guide (SHS),Standard Rail (SHS) | ds:259 mm; Bore Diameter (mm):250; Outer Diameter (mm):310; dh:290 mm; D:310 mm; r min.:2,5 mm; Basic dynamic load rating (C):83,9 kN; B:25 mm; d:250 mm; Width (mm):25; Bearing number:CRB 25025; Size (mm):250x310x25; Weight:4,97 Kg; |
| SHS65-2020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard Caged Ball LM Guide (SHS),Standard Rail (SHS) | L:5 mm; Outer Diameter (mm):66,675; C:42,48 mm; Bore Diameter (mm):33,338; F:4,76 mm; db:62,5 mm; R:1,5 mm; T:52 mm; Size (mm):33.338x66.675x52; da:44 mm; Bearing number:80033X/80066XG; D:66,675 mm; Weight:0,78 Kg; d:33,338 mm; r:0,5 mm; Width (mm):52; |
| SHS65-2620L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard Caged Ball LM Guide (SHS),Standard Rail (SHS) | Width (mm):25; Outer Diameter (mm):100; Outer Dia (D):100.0000; Dynamic Load Rating (Cr):97,400; Static Load Rating (Cor):98,300; Max Speed (Grease) (X1000 RPM):6; Bearing number:NJ309 ETN; Material:52100 Chrome steel,; Bore Dia (d):45.0000; Max. Shaft Shoulder Dia. Inner (Li):58.5; Precision:RBEC 1 |
| SHS65-1570L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard Caged Ball LM Guide (SHS),Standard Rail (SHS) | D_3:100; A:32,5 mm; D3:100 mm; D2:78 mm; yobi:53212U; D_:95; D1:62 mm; LangID:1; Prod_Type3:TB_SD_WASW; ra max.:1 mm; (Grease) Lubrication Speed:2000 r/min; r:1; KBRG:5131; Basic static load rating (C0):169 kN; A_:32.5; SRI:6.85; Width (mm):31; hidYobi:53212U; d1:95 mm; b:9 mm; |
| SHS65-3000L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard Caged Ball LM Guide (SHS),Standard Rail (SHS) | Width (mm):22,23; B:22,23 mm; d:114,3 mm; C:22,23 mm; Bore Diameter (mm):114,3; Outer Diameter (mm):158,75; D:158,75 mm; Bearing number:XLJ 4.1/2; Size (mm):114.3x158.75x22.23; |
| SHW21-130L RAIL THK Linear Bearing,Linear Motion Guides,Wide, Low Gravity Center Caged Ball LM Guide (SHW),Wide Rail (SHW) | Dimension E:2.00 in; C0 - Static Load:87200 lb; Shaft Tolerance:0.0030 in; Dimension L:4.46 in; Grease Lubrication - B/C/O Seal:1000 rpm; Oil Lubrication - M/N Seal:1400 rpm; Grease Lubrication - M/N Seal:1400 rpm; Dimension D Max:10.88 in; Eng Internal Radial Clearance - Min:0.0024; Dimension M:2.5 |
| SR15-220LY RAIL THK Linear Bearing,Linear Motion Guides,Radial Type Caged Ball LM Guide (SSR),Radial Rail (SR) for SSR Blocks | C:12,7 mm; Size (mm):6.35x11.112x12.7; Width (mm):12,7; Weight:0,004 Kg; Outer Diameter (mm):11,112; Bore Diameter (mm):6,35; D:11,112 mm; Fw:6,35 mm; Basic static load rating (C0):3,85 kN; Basic dynamic load rating (C):4 kN; Bearing number:BCE48P; |
| SHS65-1270L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard Caged Ball LM Guide (SHS),Standard Rail (SHS) | Manufacturer Item Number:NKI75/25; Minimum Buy Quantity:N/A; Cur:21700 N / Fatigue li; Product Group:B04144; Weight / LBS:1.413; Bearing number:NKI75/25; UNSPSC:31171512; Keyword String:Needle; nB:3400 1/min / Referen; Outer Diameter (mm):105; m:641 g / Weight; Noun:Bearing; Size (mm):75x105x25; Wid |
SR55-1140L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type LM Guide (SR),Radial Rail (SR) Video
SR55-1140L RAIL - THK,IKO,HIWIN,PMI-HRD-bearing
Part Number, SR55-1140L RAIL. Rail type, Caged Ball Rail. Maximum length, 1140 mm. Nominal rail size, 55 mm. Measurement standard, Metric.
THK SR55-1140L RAIL Distributor | 养贞轴承
产品型号, SR55-1140L RAIL. Rail type, Caged Ball Rail. Maximum length, 1140 mm. Nominal rail size, 55 mm. Measurement standard, 公制. 硬度, 58 to 64 HRC.
LM Guide - THK Technical Support
Standard Length and Maximum Length of the LM Rail.. 團1-102. • Tapped-hole LM Rail Type of Model SHS .. 團1-103. Caged Ball LM Guide Radial Type Model SSR .666 pages
SR55-1500L RAIL THK Linear Motion Guide | Lily Bearing
Part Number, SR55-1500L RAIL. Rail type, Caged Ball Rail. Maximum length, 1500 mm. Nominal rail size, 55 mm. Measurement standard, Metric.
SR55-1140L RAIL THK Linear Motion Guide | Lily Bearing
SR55-1140L RAIL THK Linear Motion Guide ; Maximum length, 1140 mm ; Nominal rail size, 55 mm ; Measurement standard, Metric ; Hardness, 58 to 64 HRC ; Series, SR55.
THK SR55 Series Linear Guide Systems | Technico, Inc.
Technico is a proud distributor of the THK SR55 Series Linear Guide Systems. To see more of our product ... Linear Guide System SR55+1140L G=30=G. $554.00.